Please
call sales on 01924 360444 to purchase a cylinder or
for more information
HOW
TO MEASURE YOUR CYLINDER (see diagram below)
- Measurement A - Measure from
one end of the cylinder to the middle of the central screw
hole (e.g. 40mm).
- Measurement B – Measure
from the other end to the middle of the central screw hole
(e.g. 50mm).
- This would be a 40/50 cylinder (90mm in length).
- No further measurements are required.
- (it is usually possible to measure the cylinder in the
door but to get a perfect measurement you may need to remove
the cylinder. – click here for details).
How
to replace your cylinder (in 5 minutes)
- Unscrew the fixing screw - this is located halfway
up the main lock strip – on the edge of the
door – inline with the bottom of the euro cylinder.
- Put the key in one side (use your right hand).
- Put pressure on the other key hole (with your left
index finger)
- Turn the key one way and if the cylinder does not
come straight out turn the key the other way –
the cylinder should slide out.
- Put the new keys into the
new cylinder
- Turn the key until the black cam is facing down
- Slide the cylinder into position
- Replace the fixing screw
- Check the door locks ok
- Job done!
